I'm running Yanc 1.4.beta3 with Joomla 1.0.8
I always used as Mail send method: mail

Always I setted:
Send mails out in blocks of: 1
Refresh after x blocks: 0
Pause x seconds before refresh: 0

and all Run.
But now I have a server limit for 1 mail per 30 seconds, so I change setting into:

Send mails out in blocks of: 1
Refresh after x blocks: 1
Pause x seconds before refresh: 30

But after first mail sent nothing happen and all is stopped !

What I wrong ?
and What I have to change to run it ?

Many Thanks to all for help,
Emiliano

Please, Can anyone help me 

After a lot o trials I setup as below:

Send mails out in blocks of: 1
Refresh after x blocks: 1
Pause x seconds before refresh: 20

and I tried sending 300 emails.

First problem: during sending admin login time expire and I had to refresh Manually the page

Second and most problem: to send out 300 keep 900 seconds, so 900/300= 3 seconds per email and not 20 as I setted

Do anyone have tried it and give me any suggestions 

Many Thanks,
Emiliano 

Hi Emiliano,

Can you tell me a bit more on your server environment? What relevant php settings are there (system -> system info)?
What's holding you back from sending out in block of more than one?

Tell me if I understood and/or you need more:

Operating system Linux

Service Status
cpsrvd up 
exim (exim-4.52-7_cpanel_smtpctl_av_rewrite_mm2_mmmtrap_exiscan_md5pass) up 
exim-26 up 
ftpd up 
httpd (1.3.34 (Unix)) up 
imap up 
mailman up 
mysql (4.0.25-standard) up 
named up 
pop up 
postgresql up 
spamd up 
syslogd up 
Server Load 7.40 (4 cpus) 
Memory Used 75 % 
Swap Used 80.54 % 
Disk sda2 (/) 15 % 
Disk sda1 (/boot) 18 % 
Disk sda3 (/var) 36 % 
Disk sda5 (/usr) 36 % 
Disk sda6 (/tmp) 8 % 
Disk sda8 (/home) 47 % 
Disk sdb1 (/backup) 89 %

Kernel version 2.4.32-grsec
Machine Type i686
Apache version 1.3.34 (Unix)
PERL version 5.8.7
Path to PERL /usr/bin/perl
Path to sendmail /usr/sbin/sendmail
Installed Perl Modules Click to View
PHP version 4.4.2
MySQL version 4.0.25-standard
cPanel Build 10.8.1-RELEASE 113
Theme cPanel X v2.5.0 
Documentation Click to View

and

Right now I'm using mail as Mail send method

and

I setted 1 per block because I used [name] tag on message, right now are not so important statistics

Many Thanks, Emiliano

No, i'm looking more for php settings.

log into joomla, choose system -> system info, there are some relevant php settings there.

System Information  
PHP built On:  Linux jupiter.nswebhost.com 2.4.32-grsec #2 SMP Wed Mar 15 14:32:29 CST 2006 i686 
Database Version:  4.0.25-standard 
PHP Version:  4.4.2 
Web Server:  Apache/1.3.34 (Unix) mod_auth_passthrough/1.8 mod_log_bytes/1.2 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_ssl/2.8.25 OpenSSL/0.9.7a PHP-CGI/0.1b 
WebServer to PHP interface:  cgi 
Joomla! Version:  Joomla! 1.0.8 Stable [ Sunshade ] 26-Feb-2006 05:00 UTC 
User Agent:  Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) 
Relevant PHP Settings:  Safe Mode:  OFF 
Open basedir:  none 
Display Errors:  ON 
Short Open Tags:  ON 
File Uploads:  ON 
Magic Quotes:  ON 
Register Globals:  ON 
Output Buffering:  OFF 
Session save path:  /tmp 
Session auto start:  0 
XML enabled:  Yes 
Zlib enabled:  Yes 
Disabled Functions:  ini_alter,system,passthru,shell_exec,leak,listen,chgrp,apache_setenv,define_syslog_variables,openlog,syslog,ftp_exec 
WYSIWYG Editor:  No WYSIWYG Editor 

Configuration File:  $mosConfig_MetaAuthor = '1';
$mosConfig_MetaDesc = 'Giustizia Sicura Associazione Nazionale ed Internazionale per la Salvaguardia e la Tutela dei Diritti Civili e Politici della Persona e delle Libertà Fondamentali';
$mosConfig_MetaKeys = 'Giustizia, Sicura, Associazione, Nazionale, Internazionale, Salvaguardia, Tutela, Diritti, Civili, Politici, Persona, Libertà Fondamentali';
$mosConfig_MetaTitle = '1';
$mosConfig_absolute_path = '/home/giusi/public_html';
$mosConfig_allowUserRegistration = '1';
$mosConfig_back_button = '0';
$mosConfig_cachepath = '/home/giusi/public_html/cache';
$mosConfig_cachetime = '900';
$mosConfig_caching = '0';
$mosConfig_db = 'xxxxxx'
$mosConfig_dbprefix = 'jos_';
$mosConfig_debug = '0';
$mosConfig_dirperms = '';
$mosConfig_editor = 'tinymce';
$mosConfig_enable_log_items = '0';
$mosConfig_enable_log_searches = '0';
$mosConfig_enable_stats = '1';
$mosConfig_error_message = 'This site is temporarily unavailable.
Please notify the System Administrator';
$mosConfig_error_reporting = '-1';
$mosConfig_favicon = 'favicon.ico';
$mosConfig_fileperms = '';
$mosConfig_fromname = 'giusiziasicura.org';
$mosConfig_gzip = '0';
$mosConfig_helpurl = 'http://help.joomla.org';
$mosConfig_hideAuthor = '1';
$mosConfig_hideCreateDate = '1';
$mosConfig_hideEmail = '0';
$mosConfig_hideModifyDate = '1';
$mosConfig_hidePdf = '0';
$mosConfig_hidePrint = '0';
$mosConfig_hits = '1';
$mosConfig_host = 'xxxxxx'
$mosConfig_icons = '1';
$mosConfig_item_navigation = '1';
$mosConfig_lang = 'italian';
$mosConfig_lifetime = '900';
$mosConfig_link_titles = '1';
$mosConfig_list_limit = '30';
$mosConfig_live_site = 'http://www.giustiziasicura.org';
$mosConfig_locale = 'en_GB';
$mosConfig_mailer = 'mail';
$mosConfig_mailfrom = 'info@giustiziasicura.org';
$mosConfig_ml_support = '0';
$mosConfig_multipage_toc = '1';
$mosConfig_offline = '0';
$mosConfig_offline_message = 'Questo sito è offline per manutenzione. Riprova presto.

This site is down for maintenance. Please check back again soon.';
$mosConfig_offset = '6';
$mosConfig_offset_user = '1';
$mosConfig_pagetitles = '1';
$mosConfig_password = 'xxxxxx'
$mosConfig_readmore = '1';
$mosConfig_secret = '9IG5itXI6kUiz8Xc';
$mosConfig_sef = '0';
$mosConfig_sendmail = '/usr/sbin/sendmail';
$mosConfig_session_life_admin = '1800';
$mosConfig_session_type = '0';
$mosConfig_shownoauth = '0';
$mosConfig_sitename = 'giustiziasicura.org';
$mosConfig_smtpauth = '0';
$mosConfig_smtphost = 'localhost';
$mosConfig_smtppass = '';
$mosConfig_smtpuser = '';
$mosConfig_uniquemail = '1';
$mosConfig_user = 'xxxxxx'
$mosConfig_user = 'xxxxxx'
$mosConfig_vote = '0';
setlocale (LC_TIME, $mosConfig_locale);
?>

Is it right ? 

mm.. there really is no reason your mailing isn't send out.
Did you try changing the way messages are being send out (In the YaNC configuration..)

I try and let you know 

Just ask again if you have an idea on why :
"I set
Pause x seconds before refresh: 20
but to send out 300 keep 900 seconds, so 900/300= 3 seconds per email and not 20 as I setted" 

Please,

changing "Mail" in Yank configuration
Have I to change it also in "Mail" into Joomla Global Configuration ?

No, yanc will only 'listen' to it's own configuration.

doctorlife wrote:Just ask again if you have an idea on why :
"I set
Pause x seconds before refresh: 20
but to send out 300 keep 900 seconds, so 900/300= 3 seconds per email and not 20 as I setted" 

I'm using a function called sleep to do this, don't know why your server isn't picking that up though

and, what about this :

doctorlife wrote:changing "Mail" in Yank configuration
Have I to change it also in "Mail" into Joomla Global Configuration ?

Many Thanks

Hi Adam,

After a lot o trials with a small list of 3 emails 

I setup as below:

Send mails out in blocks of: 1
Refresh after x blocks: 1
Pause x seconds before refresh: 20

html and/or text same results:

mail = around 3 seconds
sendmail = around 3 seconds
smtp with authentication = around 12 seconds

Moving "Pause x seconds before refresh:" up it seem times didn't change and up to 30 the IE not refresh and complete sending only the first email ... all stop and I have to re login into joomla administration

Moving "Pause x seconds before refresh:" down it seem times didn't change, it seem that the time shown is simple "a minimum technical time" of email sending

It seem "Pause x seconds before refresh:" don't set nothing 

I tried also to add some emails to the list but nothing change and time not increase proportionally

Finally I tried to change "Refresh after x blocks:" = 2
but again nothing change ...


Please, what can be ? What can I do 
May be anything related with my IE browser  Anything to change on it 
May be anything I have to ask to my hoster about server setting 

Many Thanks,
Emiliano

Please, Do Anyone have suggestions here for me 

many thanks

Thinking this can help other people have same problem,
and also Adam for YaNC,
and Thinking we can add force (ANJEL + YaNC) and develope 1 upgraded big Newsletter Component for Joomla :

I solved this my need installing ANJEL 0.6.1. final (3) + http://developer.joomla.org/sf/discussi ... p.topc1917

and all seem to run

Hooping to receive feedback from all you ...

Read you soon, Emiliano alias doctorlife