Multilingual Registration Approval - support

This forum is for general questions about extensions for Joomla! version 1.5.x.

Moderator: General Support Moderators

Forum rules
Forum Rules
Absolute Beginner's Guide to Joomla! <-- please read before posting, this means YOU.
Forum Post Assistant - If you are serious about wanting help, you will use this tool to help you post.
Locked
User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Multilingual Registration Approval - support

Post by infograf768 » Fri Jun 19, 2009 9:32 am

Please post here any question you may have on this system plugin.

http://extensions.joomla.org/extensions ... 07/details

WARNING:
This plugin should NOT be used with Jomsocial!
If it was, the site would be vulnerable.
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

dvegmond
Joomla! Apprentice
Joomla! Apprentice
Posts: 7
Joined: Sun Jun 21, 2009 7:21 pm

Re: Multilingual Registration Approval - support

Post by dvegmond » Sun Jun 21, 2009 7:46 pm

Hallo, I have Joomla 1.5.11 installed in the dutch language.
I installed this plugin, i like very much, however i do not see any difference between without and with the plugin installed. The template i use is "freeride"and has the jdoc:include type= "message" in it. I click on "do not forget to publish click here and also activate it.
But the administrator get an inform message and the user the message with the activation link
So no change with and without the plugin.
Please can you give me some hints for checking the plugin installation.
Thanks in advance,
Regards Daan

User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Re: Multilingual Registration Approval - support

Post by infograf768 » Mon Jun 22, 2009 7:14 am

dvegmond wrote:Hallo, I have Joomla 1.5.11 installed in the dutch language.
I installed this plugin, i like very much, however i do not see any difference between without and with the plugin installed. The template i use is "freeride"and has the jdoc:include type= "message" in it. I click on "do not forget to publish click here and also activate it.
But the administrator get an inform message and the user the message with the activation link
So no change with and without the plugin.
Please can you give me some hints for checking the plugin installation.
Thanks in advance,
Regards Daan
It is sufficient to install and publish the plugin.

The first messages and mails are the default ones in your language/nl-NL/nl-NL.com_user.ini file, as if the plugin was not published.

You may want to change slightly the message for the user to reflect the new way of registration.
the token is
REG_COMPLETE_ACTIVATE=[...]. //add here in your language: An admin will then verify your mail and approve your registration.
and also change the content of the mail sent to the user in the same file
SEND_MSG_ACTIVATE= //change there
After activation you may login...etc.
by
After approval by an administrator, you will be able to login...etc.

Anyway, what happens is that, when the user clicks on the activation link, a new message is displayed telling the user that an admin has to accept his registration.
At the same time an e-mail is sent to the admin letting the choice to activate the user or not.
If the admin activates the user, a new mail is sent to the user letting the user know that login is now possible.
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

dvegmond
Joomla! Apprentice
Joomla! Apprentice
Posts: 7
Joined: Sun Jun 21, 2009 7:21 pm

Re: Multilingual Registration Approval - support

Post by dvegmond » Mon Jun 22, 2009 7:26 pm

Hallo, Thanks for your reply, It's working now fine. Regards Daan

tpaschalis
Joomla! Fledgling
Joomla! Fledgling
Posts: 3
Joined: Tue Jun 23, 2009 8:44 am

Re: Multilingual Registration Approval - support

Post by tpaschalis » Tue Jun 23, 2009 8:55 am

Hi,

I just installed the Multilingual registration approval plugin and I get the following message when I try to connect as a user or as an administrator.

JAuthentication::__construct: Could not load authentication libraries.
The username and password do not match

I have version 1.5.9

I also tried to restore a previous backup but no luck.

Please help.

User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Re: Multilingual Registration Approval - support

Post by infograf768 » Tue Jun 23, 2009 9:18 am

Is the registration working when the plugin is unpublished?
Do you have at least one admin authorized to receive/send mail ?
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

tpaschalis
Joomla! Fledgling
Joomla! Fledgling
Posts: 3
Joined: Tue Jun 23, 2009 8:44 am

Re: Multilingual Registration Approval - support

Post by tpaschalis » Tue Jun 23, 2009 1:28 pm

Thank you for your prompt response.

It is OK now.

It was my fault.

Is there a way of changing the messages ?

Can I add acceptance of terms of use?

User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Re: Multilingual Registration Approval - support

Post by infograf768 » Tue Jun 23, 2009 3:56 pm

tpaschalis wrote:Thank you for your prompt response.

It is OK now.

It was my fault.

Is there a way of changing the messages ?

Can I add acceptance of terms of use?
The 2 first messages and mail depend on your xx-XX.com_user.ini
The others come from the plugin language files
You can change the contents of the plugin language files in administrator/language/ xx-XX/xx-XX.plg_system_registrationapproval.ini

where xx-XX is the prefix for the language.

Make sure you place the variables OK ( %s) and save language file as utf8.
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

tpaschalis
Joomla! Fledgling
Joomla! Fledgling
Posts: 3
Joined: Tue Jun 23, 2009 8:44 am

Re: Multilingual Registration Approval - support

Post by tpaschalis » Wed Jul 01, 2009 1:58 pm

infograf768 wrote:
tpaschalis wrote:Thank you for your prompt response.

It is OK now.

It was my fault.

Is there a way of changing the messages ?

Can I add acceptance of terms of use?
The 2 first messages and mail depend on your xx-XX.com_user.ini
The others come from the plugin language files
You can change the contents of the plugin language files in administrator/language/ xx-XX/xx-XX.plg_system_registrationapproval.ini

where xx-XX is the prefix for the language.

Make sure you place the variables OK ( %s) and save language file as utf8.
Still have a problem with the messages.
I forgot to tell you that I also have VirtueMart installed and user registration depends also from that. Because I have to record a different tax % depending on the Address.

As a procedure it works, but the messages are different and after the aproval no message is send back to the user

Thanks again for your help.

wto
Joomla! Apprentice
Joomla! Apprentice
Posts: 5
Joined: Mon Jan 19, 2009 4:08 am

Multilingual Registration Message

Post by wto » Tue Jul 14, 2009 3:35 am

Hi,
Love this plugin.

But my user never gets the message after activating.

Is there a special position in the template to add the jdoc.

Thanx.

X.

User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Re: Multilingual Registration Message

Post by infograf768 » Tue Jul 14, 2009 5:57 am

wto wrote:
Is there a special position in the template to add the jdoc.
Just has to be visible. Look at Joomla default templates.
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

mschnyde
Joomla! Fledgling
Joomla! Fledgling
Posts: 4
Joined: Thu Jul 02, 2009 3:32 pm

Re: Multilingual Registration Approval - support

Post by mschnyde » Mon Jul 20, 2009 10:28 pm

Hi

I installed the registrationapproval. everthing works, user can register, user get an e-mail, he can click the link to verify the e-mail address, but I (as an admin) don't get an e-mail. I have Joomfish 2.0.3 in place. could this be the problem?

mschnyde
Joomla! Fledgling
Joomla! Fledgling
Posts: 4
Joined: Thu Jul 02, 2009 3:32 pm

Re: Multilingual Registration Approval - support

Post by mschnyde » Mon Jul 20, 2009 10:48 pm

mschnyde wrote:Hi

I installed the registrationapproval. everthing works, user can register, user get an e-mail, he can click the link to verify the e-mail address, but I (as an admin) don't get an e-mail. I have Joomfish 2.0.3 in place. could this be the problem?
Just figured out. I seems the plugin uses the "admin" user account. For security reason, I created another Super Admin account and downgraded the admin a a publisher. Since I gave the user admin Super Admin privilege it works fine!

btw: It's a great plugin

User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Re: Multilingual Registration Approval - support

Post by infograf768 » Tue Jul 21, 2009 6:46 am

Do NOT forget to customize the Email and From parameter for each language in Joomfish language configuration (click on right icon).
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

KWood
Joomla! Apprentice
Joomla! Apprentice
Posts: 10
Joined: Sun Mar 04, 2007 9:28 am

Re: MRA - support - email sender missing

Post by KWood » Sun Aug 09, 2009 4:48 pm

Hi
I have just installed the script and it was what I nedded...
The two first mails (the normal joomla mails when registrering) comes all fine.
but the mail to the admin that there's a user needing aproval and the following mail to the user about account aproved is missing an entry in the sender E-mail. it is blank...
I am running joomla 1.5.14 with joomfish and more...
edit!
found out it is Jommfish... My default language is danish, and I have English as the only other language. All values on the servertab is written in danish, I have therefore not med a "danish to danish" translation i joomfish, and therefore the site name is missing in the danish edition of first mail to the admin and the user. If i set any and/or all of the "danish to danish" tranlation the sitename will be present in the first to mails to user/admin but then when the user press the activation/confirmation the site reports "Can't initialise the Mailfunktion" (my translation from danish)
Note there isn't any problems when registrering in English ... HELP!

EDIT:
Hmmm this is weird...
I have now ONLY inserted the E-mail and from field in the danish joomfish translation and the script works... (but still no email in the sender field of the second set of emails...)
But when inserting the site name in the danish joomfish translation, the mailfunction can't be initialized after the user presses the activation link... - if I only "translate" the sitename, same thing happen
If I disable the overwrite globals values setting i joomfish danish fails bu English does not...

User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Re: Multilingual Registration Approval - support

Post by infograf768 » Mon Aug 10, 2009 5:26 am

If Danish is your main language in Joomfish, then all is set for it per default.
It is in the Joomfish English language Configuration that Site name and From field have to be entered.
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

KWood
Joomla! Apprentice
Joomla! Apprentice
Posts: 10
Joined: Sun Mar 04, 2007 9:28 am

Re: Multilingual Registration Approval - support

Post by KWood » Mon Aug 10, 2009 8:44 pm

infograf768 wrote:If Danish is your main language in Joomfish, then all is set for it per default.
It is in the Joomfish English language Configuration that Site name and From field have to be entered.
Hi
Yes and when registering in English all is fine... but... when registrering in danish as written further up, the sitename is missing in the first to emails (the joomla emails) og the sender e-mail/from field is missing in the to latter emails (the MRA mails)... it is realy frustrating...

cf1237
Joomla! Enthusiast
Joomla! Enthusiast
Posts: 161
Joined: Thu Mar 19, 2009 1:48 pm

Re: Multilingual Registration Approval - support

Post by cf1237 » Fri Aug 21, 2009 5:07 pm

Hello! I am trying to use this extension. I installed and activated it, but it doesn't do anything - new users can register and use the site without anything else happening. No emails are sent, but a Message appears at the top of the main page, "You May Now Log In." The new user is apparently able to do so without admin intervention.

When a new user registers, the message appears,

"Your account has been created and an activation link has been sent to the e-mail address you entered. Note that you must activate the account by clicking on the activation link when you get the e-mail before you can login."

The new users does receive an email with the activation link, but there is apparently no admin intervention required!

I am still getting the hang of Joomla extensions, so please forgive me if I am missing what is probably very obvious to most people...

User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Re: Multilingual Registration Approval - support

Post by infograf768 » Sun Aug 23, 2009 4:57 pm

Looks like the plugin is not published.
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

elviscen
Joomla! Apprentice
Joomla! Apprentice
Posts: 16
Joined: Sun Aug 23, 2009 8:53 pm

Re: Multilingual Registration Approval - support

Post by elviscen » Sun Aug 23, 2009 9:01 pm

Hello!

I install the plugin with Joomla in Slovenian language.
The plugin is published.
I make an test registration and the user receive the message "SEND_MSG_ACTIVATE" without any other text and link for acctivation.
The administrator receive the message "SEND_MSG_ADMIN" without any other text and link.
The user is in the user list but not acctivated.
Where is the error?
Please help me resolve the problem.

Anyone know where can I change the text in the message "404 - Contact not found".

Thanks.

User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Re: Multilingual Registration Approval - support

Post by infograf768 » Mon Aug 24, 2009 6:28 am

1. These 2 strings ( SEND_MSG_ACTIVATE and SEND_MSG_ADMIN) should be present in your Slovenian normal language pack, in language/sl-SL/sl-SL.com_user.ini
Where did you get the pack? I am not aware of any registered Slovenian pack for now.

2. Anyhow, for the rest of the plugin necessary strings, Slovenian translation is not included in this plugin.
You will have to create an ini file for it.
Copy the existing
en-GB.plg_system_registrationapproval.ini
change the name to
sl-SL.plg_system_registrationapproval.ini
Translate the strings, save as utf8 encoding.
FTP the file to your sl-SL administrator/language/sl-SL/ folder
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

cf1237
Joomla! Enthusiast
Joomla! Enthusiast
Posts: 161
Joined: Thu Mar 19, 2009 1:48 pm

Re: Multilingual Registration Approval - support

Post by cf1237 » Mon Aug 24, 2009 2:09 pm

I wrote:

"The new users does receive an email with the activation link, but there is apparently no admin intervention required!"

I checked - and the plug-in is published - and it works! I looked in the admin panel/User Manager, and new users are indeed registered, but not enabled - this is the correct operation of the plug-in, I think.

What I need to do is to change:

The MESSAGE sent that appears when a new users submits the registration for the first time. This message now says, "Your account has been created and an activation link has been sent to the e-mail address you entered. Note that you must activate the account by clicking on the activation link when you get the e-mail before you can login."

I think it would be good to alter this message so that the new user realizes that the account must be approved before it actually works.

What file generates this message text?

User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Re: Multilingual Registration Approval - support

Post by infograf768 » Mon Aug 24, 2009 4:42 pm

Yes indeed and that is why I told you the file that should contain these strings
language/sl-SL/sl-SL.com_user.ini
for Slovenian
language/en-GB/en-GB.com_user.ini
for English.

Read the TIP here:
http://extensions.joomla.org/extensions ... ation/9007
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

elviscen
Joomla! Apprentice
Joomla! Apprentice
Posts: 16
Joined: Sun Aug 23, 2009 8:53 pm

Re: Multilingual Registration Approval - support

Post by elviscen » Tue Aug 25, 2009 6:11 pm

Thank you for your help.

In my sl-SL.com_user.ini was missing SEND_MSG_ACTIVATE and SEND_MSG_ADMIN, I add it and work.
I translate the en-GB.plg_system_registrationapproval.ini file and rename it in sl-SL.plg_system_registrationapproval.ini.

I have a little problem the first two messages is in slovenian (account aktivation send to user and administrator), other messages when user acctivate account is in english (message to administrator that user acctivate the account and messages to user when administrator acctivate the user).
I missing the messages on the page when new user register (message in blue box if ok and red if user exist).

Where is the possible error?

The default language set in joomla is Slovenian.
Attached my translated file. Is possible that I make any mistake in the translated file.

I have installed Joom!Fish but at this moment is disabled. Is there the problem?
You do not have the required permissions to view the files attached to this post.

mcpilot25
Joomla! Apprentice
Joomla! Apprentice
Posts: 29
Joined: Sat Dec 27, 2008 12:57 pm

INtermittent Error when approving user

Post by mcpilot25 » Tue Aug 25, 2009 8:31 pm

Hi - this is the error I am getting sometimes, not all the time:

"unable to find a user with the given activation string".

user registers, clicks link, superadmin get the email to approve the user, and when doing so, the above message shows.

However, the user shows as APPROVED, in the user manager, but, the user cannot log in.

Is there a reason for this and a reason it might only be happening from my client's office and not when I attempt to replicate it?

Thanks in advance,

Pat

elviscen
Joomla! Apprentice
Joomla! Apprentice
Posts: 16
Joined: Sun Aug 23, 2009 8:53 pm

Re: Multilingual Registration Approval - support

Post by elviscen » Tue Aug 25, 2009 8:45 pm

I have found one of my problem, my mistake. I rename the file in sl-SL..., the correct is sl-SI...
and every time I change anything in sl-SI.plg_system_registrationapproval.ini they cancel messages SEND_MSG_ACTIVATE and SEND_MSG_ADMIN in my sl-SI.com_user.ini
At this time I save the two files and work fine.

In the attachment is for me working sl-SI.plg_system_registrationapproval.ini

The problem that I don't found is missing the messages on the page when new user register (message in blue box that tell user receiving e-mail for acctivation if all ok and red box with errors if is an error in registration).

Where is the possible error?
You do not have the required permissions to view the files attached to this post.

kimborg
Joomla! Intern
Joomla! Intern
Posts: 84
Joined: Mon Jul 31, 2006 7:32 am

No approval message is sent

Post by kimborg » Tue Aug 25, 2009 11:00 pm

Everything works fine, but no message is sent to user after admin has approved (activated) him / her. I'm using the VirtueMart login module, and has changed the language file for this component. I guess this has nothing to do with the jdoc statement in the template, as the first message (when user har registrered) is displayed just fine on the page. What could be wrong?

User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Re: No approval message is sent

Post by infograf768 » Wed Aug 26, 2009 5:32 am

kimborg wrote:Everything works fine, but no message is sent to user after admin has approved (activated) him / her. I'm using the VirtueMart login module, and has changed the language file for this component. I guess this has nothing to do with the jdoc statement in the template, as the first message (when user har registrered) is displayed just fine on the page. What could be wrong?
Never tested with Virtuemart login module.
Does it work OK with Joomla default login?
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

User avatar
infograf768
Joomla! Master
Joomla! Master
Posts: 19133
Joined: Fri Aug 12, 2005 3:47 pm
Location: **Translation Matters**

Re: Multilingual Registration Approval - support

Post by infograf768 » Wed Aug 26, 2009 5:41 am

elviscen wrote:I have found one of my problem, my mistake. I rename the file in sl-SL..., the correct is sl-SI...
and every time I change anything in sl-SI.plg_system_registrationapproval.ini they cancel messages SEND_MSG_ACTIVATE and SEND_MSG_ADMIN in my sl-SI.com_user.ini
At this time I save the two files and work fine.

In the attachment is for me working sl-SI.plg_system_registrationapproval.ini

The problem that I don't found is missing the messages on the page when new user register (message in blue box that tell user receiving e-mail for acctivation if all ok and red box with errors if is an error in registration).

Where is the possible error?
Are you sure the index.php of your template contains a position for the Message (jdoc:include type= "message") ?
Jean-Marie Simonet / infograf
---------------------------------
ex-Joomla Translation Coordination Team • ex-Joomla! Production Working Group

kimborg
Joomla! Intern
Joomla! Intern
Posts: 84
Joined: Mon Jul 31, 2006 7:32 am

Re: No approval message is sent

Post by kimborg » Wed Aug 26, 2009 7:18 am

infograf768 wrote:
kimborg wrote:Everything works fine, but no message is sent to user after admin has approved (activated) him / her. I'm using the VirtueMart login module, and has changed the language file for this component. I guess this has nothing to do with the jdoc statement in the template, as the first message (when user har registrered) is displayed just fine on the page. What could be wrong?
Never tested with Virtuemart login module.
Does it work OK with Joomla default login?
I would think that the activation backende by admin should work regardless of login module. I mean, the user is registrered, but not activated. So all is fine up to this poinnt. Only thing that remains is to send the last mail from when activated. And that is a standard Joomle-function ...


Locked

Return to “Extensions for Joomla! 1.5”