Advertisement
PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
Moderator: General Support Moderators
Forum rules
Forum Rules
Absolute Beginner's Guide to Joomla! <-- please read before posting, this means YOU.
Forum Post Assistant - If you are serious about wanting help, you will use this tool to help you post.
Windows Defender SmartScreen Issues <-- please read this if using Windows 10.
Forum Rules
Absolute Beginner's Guide to Joomla! <-- please read before posting, this means YOU.
Forum Post Assistant - If you are serious about wanting help, you will use this tool to help you post.
Windows Defender SmartScreen Issues <-- please read this if using Windows 10.
-
- Joomla! Explorer
- Posts: 353
- Joined: Sat Aug 20, 2005 3:05 pm
- Location: 1135 N Broadway #213 Denver, CO 80203
- Contact:
PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
I am trying to change my PHP version from 7.4 to 8 but I always get this error and I can't figure out why this is happening.
The Xenon template is the template that the website uses, but I still get this error when I change to the default Beez template as well.
I have downloaded and installed the latest Gantry 5 version, checked and everything published.
I don't understand why I would get a template error about the Xenon template when I switch my default template over to Beez and then change my PHP to 8.0.
This one thing is not allowing me to change over to PHP 8
The Xenon template is the template that the website uses, but I still get this error when I change to the default Beez template as well.
I have downloaded and installed the latest Gantry 5 version, checked and everything published.
I don't understand why I would get a template error about the Xenon template when I switch my default template over to Beez and then change my PHP to 8.0.
This one thing is not allowing me to change over to PHP 8
Advertisement
- Per Yngve Berg
- Joomla! Master
- Posts: 31330
- Joined: Mon Oct 27, 2008 9:27 pm
- Location: Romerike, Norway
Re: PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
There is also Plugins that have to be disabled.
- AMurray
- Joomla! Master
- Posts: 10254
- Joined: Sat Feb 13, 2010 7:35 am
- Location: Australia
Re: PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
What is the actual error (not mentioned in your OP)?
I have my doubts about Beez3 template working on PHP 8 since it was shipped with J3 in its early days, years before PHP 8...but I could be wrong. Perhaps try the Protostar template instead to see if you get the same error. What version of Joomla 3 are you running - assume 3.10.x (the latest, and last version in the J3 series)?
You say you use the latest Gantry framework, but what about the latest Xeon template version (v 1.5 Nov 11, 2021)?
Just noting that PHP 8.0 is EOL (November 2023). Joomla 3.x is EOL (September 2023). Suggest updating to 4.4.x.
Even using PHP 8.1 with Joomla 3.10 may be possible but you will more than likely run into issues with any extensions used that are not going to work with PHP 8.1
But I'm also thinking Xeon may be too old for PHP 8.x Rocket Theme site says Xeon min requirement is PHP 7.1 but nothing in the template's change log about PHP 8.x compatibility.
For reference: Xeon template is not mentioned here: https://rockettheme.com/product-updates nor https://rockettheme.com/joomla-template ... ity-matrix
Also Gantry website (documentation) says "Always use the latest stable Joomla" - so again, suggest Joomla 4.4 at least.
I have my doubts about Beez3 template working on PHP 8 since it was shipped with J3 in its early days, years before PHP 8...but I could be wrong. Perhaps try the Protostar template instead to see if you get the same error. What version of Joomla 3 are you running - assume 3.10.x (the latest, and last version in the J3 series)?
You say you use the latest Gantry framework, but what about the latest Xeon template version (v 1.5 Nov 11, 2021)?
Just noting that PHP 8.0 is EOL (November 2023). Joomla 3.x is EOL (September 2023). Suggest updating to 4.4.x.
Even using PHP 8.1 with Joomla 3.10 may be possible but you will more than likely run into issues with any extensions used that are not going to work with PHP 8.1
But I'm also thinking Xeon may be too old for PHP 8.x Rocket Theme site says Xeon min requirement is PHP 7.1 but nothing in the template's change log about PHP 8.x compatibility.
For reference: Xeon template is not mentioned here: https://rockettheme.com/product-updates nor https://rockettheme.com/joomla-template ... ity-matrix
Also Gantry website (documentation) says "Always use the latest stable Joomla" - so again, suggest Joomla 4.4 at least.
Regards - A Murray
General Support Moderator
General Support Moderator
-
- Joomla! Explorer
- Posts: 353
- Joined: Sat Aug 20, 2005 3:05 pm
- Location: 1135 N Broadway #213 Denver, CO 80203
- Contact:
Re: PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
I have Xenon installed on my Joomla 4 install on my website's subdomain just to test and it works fine on Joomla 4 with php 8 set.AMurray wrote: ↑Sun Dec 17, 2023 10:14 pm What is the actual error (not mentioned in your OP)?
I have my doubts about Beez3 template working on PHP 8 since it was shipped with J3 in its early days, years before PHP 8...but I could be wrong. Perhaps try the Protostar template instead to see if you get the same error. What version of Joomla 3 are you running - assume 3.10.x (the latest, and last version in the J3 series)?
You say you use the latest Gantry framework, but what about the latest Xeon template version (v 1.5 Nov 11, 2021)?
Just noting that PHP 8.0 is EOL (November 2023). Joomla 3.x is EOL (September 2023). Suggest updating to 4.4.x.
Even using PHP 8.1 with Joomla 3.10 may be possible but you will more than likely run into issues with any extensions used that are not going to work with PHP 8.1
But I'm also thinking Xeon may be too old for PHP 8.x Rocket Theme site says Xeon min requirement is PHP 7.1 but nothing in the template's change log about PHP 8.x compatibility.
For reference: Xeon template is not mentioned here: https://rockettheme.com/product-updates nor https://rockettheme.com/joomla-template ... ity-matrix
Also Gantry website (documentation) says "Always use the latest stable Joomla" - so again, suggest Joomla 4.4 at least.
Yes, my Joomla 3 install is 3.10.
I just set Prostar as my template to test, enabled php 8, and the website gives the same following error "Failed to load 'rt_xenon' template: Please install Gantry 5 Framework!" The website this is happening to is in my signature. I can't upgrade it past php 7.4 or I get that error no matter what template I try to use.
Thinking about just moving the content over to the subdomain where Xenon/J4/and PHP8+ will run fine and doing a 301 redirect from the main domain over to the subdomain. I'm just not skilled enough to be able to upgrade and troubleshoot the Joomla 3.10 install to get it upgraded so it can run Joomla4/Xenon/Php8+
Xenon runs on both J3 and J4 so I wouldn't think that the problem. My subdomain is https://guide.denverdonate.com/ where J4 is installed and where I tested Xenon, temporarily enabling the template and PhP8+, everything worked fine. The problem is that I can't enable php8+ at all permanently because both websites are on the same host. If I enable php8+ then the main domain gives that Xenon/Gantry error.
Denver Colorado https://www.denverdonate.com/
- Webdongle
- Joomla! Master
- Posts: 44644
- Joined: Sat Apr 05, 2008 9:58 pm
Re: PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
What have you downloaded from https://gantry.org/downloads ?
http://www.weblinksonline.co.uk/
https://www.weblinksonline.co.uk/updating-joomla.html
"When I'm right no one remembers but when I'm wrong no one forgets".
https://www.weblinksonline.co.uk/updating-joomla.html
"When I'm right no one remembers but when I'm wrong no one forgets".
-
- Joomla! Explorer
- Posts: 353
- Joined: Sat Aug 20, 2005 3:05 pm
- Location: 1135 N Broadway #213 Denver, CO 80203
- Contact:
Re: PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
joomla-pkg_gantry5_v5.5.17.zipWebdongle wrote: ↑Mon Dec 18, 2023 1:01 am What have you downloaded from https://gantry.org/downloads ?
Here's a screenshot showing it's installed (Joomla 3.10)
Latest version of Xenon is installed
You do not have the required permissions to view the files attached to this post.
Denver Colorado https://www.denverdonate.com/
- Webdongle
- Joomla! Master
- Posts: 44644
- Joined: Sat Apr 05, 2008 9:58 pm
Re: PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
That's a dev package. Perhaps they can better answer your question?
http://www.weblinksonline.co.uk/
https://www.weblinksonline.co.uk/updating-joomla.html
"When I'm right no one remembers but when I'm wrong no one forgets".
https://www.weblinksonline.co.uk/updating-joomla.html
"When I'm right no one remembers but when I'm wrong no one forgets".
- AMurray
- Joomla! Master
- Posts: 10254
- Joined: Sat Feb 13, 2010 7:35 am
- Location: Australia
Re: PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
Yes, RT site says it runs on "Joomla 4" but not necessarily on PHP 8......
Other thing to try, uninstall the Gantry 5 framework completely and reinstall it. I don't know why Protostar is complaining since it doesn't use Gantry 5.
Other thing to try, uninstall the Gantry 5 framework completely and reinstall it. I don't know why Protostar is complaining since it doesn't use Gantry 5.
Regards - A Murray
General Support Moderator
General Support Moderator
- Webdongle
- Joomla! Master
- Posts: 44644
- Joined: Sat Apr 05, 2008 9:58 pm
Re: PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
Probably because the op installed a gantry quickstart package and it was a development one at that.
If the op had installed the Joomla full package and installed gantry into that then they would not have the problem.
Clearly the problem is the gantry quickstart development package. The op needs to contact them.
http://www.weblinksonline.co.uk/
https://www.weblinksonline.co.uk/updating-joomla.html
"When I'm right no one remembers but when I'm wrong no one forgets".
https://www.weblinksonline.co.uk/updating-joomla.html
"When I'm right no one remembers but when I'm wrong no one forgets".
- AMurray
- Joomla! Master
- Posts: 10254
- Joined: Sat Feb 13, 2010 7:35 am
- Location: Australia
Re: PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
Yes, perhaps the OP can do a secondary test, on a subdomain (or localhost - Wampserver would be my choice) and install the quickstart again and see if the problem can be replicated.
And as you have mentioned, additionally, a third test, this time a clean install of Joomla, then install only the framework plugin and the standalone template and see if the problem can be replicated
And as you have mentioned, additionally, a third test, this time a clean install of Joomla, then install only the framework plugin and the standalone template and see if the problem can be replicated
Regards - A Murray
General Support Moderator
General Support Moderator
-
- I've been banned!
- Posts: 347
- Joined: Mon Jul 03, 2023 7:08 pm
Re: PHP 8: Failed to load Xenon template: Please install Gantry 5 Framework!
1) Gantry 5.5.17 is the latest version available (released on 31-Oct-2023). It runs fine on J! 3.10 and J! 4.4. It runs on PHP 7.4 and PHP 8.1.11. I know this because I use the Helium template on a couple of my websites.
2) Gantry 5.5.17 is not a "development" version.
3) I see no indication here that the OP has installed a "quickstart" package.
4) Xenon 1.5.0 was released by Rockettheme on 30-Nov-2021. It is the latest version available. I do not know if this template is compatible with J! 4.x; the OP asks about whether their J! 3.10 website will run with PHP 8.x and Xenon.
Slightly off-topic: Maintenance on Beez3 ceased around the time when J! 3.8 happened. The only default template for J! 3.10 that has any moderate chance of success is Protostar.
2) Gantry 5.5.17 is not a "development" version.
3) I see no indication here that the OP has installed a "quickstart" package.
4) Xenon 1.5.0 was released by Rockettheme on 30-Nov-2021. It is the latest version available. I do not know if this template is compatible with J! 4.x; the OP asks about whether their J! 3.10 website will run with PHP 8.x and Xenon.
Yes, as @AMurray observed, it is strange that using Protostar as the default template would raise error messages about Xenon but it's not unheard of. It's possible that the website in question is missing some vital part of Gantry 5 and re-installing the Gantry 5 package may fix that problem. I've has similar problems with incompletely installed extensions that were remedied by re-installing them.
Slightly off-topic: Maintenance on Beez3 ceased around the time when J! 3.8 happened. The only default template for J! 3.10 that has any moderate chance of success is Protostar.
Advertisement