Mehdi's Bridge for Phpbb2 (not 3 yet ...)
Moderator: General Support Moderators
Forum rules
-
- Joomla! Explorer
- Posts: 437
- Joined: Tue Oct 04, 2005 3:56 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
hi atlantean0208,
I advise you perform a local test to understand how the bridge works.
Login/registrations are controlled from joomla, only
All login attempt from phpbb are redirected to joomla.
Same thing for registration.
I advise you perform a local test to understand how the bridge works.
Login/registrations are controlled from joomla, only
All login attempt from phpbb are redirected to joomla.
Same thing for registration.
-
- Joomla! Fledgling
- Posts: 2
- Joined: Sat Oct 06, 2007 9:31 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
Oh!, if that the case then its not going to work for me, its already establish that all my user visiting my website domain all redirected to my phpbb portal, so I want the user to all register/login through my phpbb portal and then they can either visit the forum or the joomla shop (virtuemart). Your mod I think can only be used if joomla controlling everything (main website).mehdi wrote: hi atlantean0208,
I advise you perform a local test to understand how the bridge works.
Login/registrations are controlled from joomla, only
All login attempt from phpbb are redirected to joomla.
Same thing for registration.
In case if I myself want to develop a mod for this, what actually need to be done:
- to register a joomla user (I assume this will just inserting a user into the joomla user DB)
- to set a joomla session
-
- Joomla! Fledgling
- Posts: 2
- Joined: Sun Sep 30, 2007 3:51 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
Hi Mehdi,
It's nice to see your creation in bridging joomla and phpbb2. But, i have a problem in language setting. I set "indonesian" as the language of my phpbb. When I use your bridge, there's a different language everytime i enter the forum. If I'm a guest in joomla, the phpbb forum still show indonesian language (both text and images). But after login, the language in phpbb change to english.... I really want to use indonesian as a language in my forum, because my whole site using indonesian... Can you help me solve this problem?
Looking forward for your reply,
Thanks a lot...
It's nice to see your creation in bridging joomla and phpbb2. But, i have a problem in language setting. I set "indonesian" as the language of my phpbb. When I use your bridge, there's a different language everytime i enter the forum. If I'm a guest in joomla, the phpbb forum still show indonesian language (both text and images). But after login, the language in phpbb change to english.... I really want to use indonesian as a language in my forum, because my whole site using indonesian... Can you help me solve this problem?
Looking forward for your reply,
Thanks a lot...
-
- Joomla! Explorer
- Posts: 437
- Joined: Tue Oct 04, 2005 3:56 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
hi ichanx ,
I think the default language is set at indonesian,
but in your phpbb user account (see profile) , your preference is set to english.
Any new registred user should have indenosian lang set by default, while they still can change preference to english.
This problem is not related to the bridge at all.
I think the default language is set at indonesian,
but in your phpbb user account (see profile) , your preference is set to english.
Any new registred user should have indenosian lang set by default, while they still can change preference to english.
This problem is not related to the bridge at all.
-
- Joomla! Fledgling
- Posts: 2
- Joined: Sun Sep 30, 2007 3:51 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
lol....
Thanks a lot mehdi... I'm a SUPER NEWBIE in phpbb ... My problem solved.... God bless you!!!
Thanks a lot mehdi... I'm a SUPER NEWBIE in phpbb ... My problem solved.... God bless you!!!
-
- Joomla! Enthusiast
- Posts: 108
- Joined: Thu Jan 26, 2006 2:29 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
*Sorry for the double post - I posted this in integrations and then found the sub forum it can be deleted from the other forum*
I installed a fresh copy of phpbb and followed mehdis instructions to bridge it to joomla, as it was a fresh install i just overwrote the appropriate files.
It seems to be working quite well but the page keeps dropping down a box that says:
"The page at http://www.willowtreecrafts.co.uk says
there was a problem retrieving the xml data: Not Found"
and I can't work out how to get into the administration panel - when i go to phpbb it says i am logged in, and there is the link to the administration panel, but it won't accept my password,
Can anyone help?
tia
I installed a fresh copy of phpbb and followed mehdis instructions to bridge it to joomla, as it was a fresh install i just overwrote the appropriate files.
It seems to be working quite well but the page keeps dropping down a box that says:
"The page at http://www.willowtreecrafts.co.uk says
there was a problem retrieving the xml data: Not Found"
and I can't work out how to get into the administration panel - when i go to phpbb it says i am logged in, and there is the link to the administration panel, but it won't accept my password,
Can anyone help?
tia
-
- Joomla! Enthusiast
- Posts: 108
- Joined: Thu Jan 26, 2006 2:29 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
update - the xmla was because we have JIM running (PM system)
turning of the module fixed that, but I still can't login to the admin panel, it says my password is not correct,
turning of the module fixed that, but I still can't login to the admin panel, it says my password is not correct,
-
- Joomla! Explorer
- Posts: 437
- Joined: Tue Oct 04, 2005 3:56 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
hi willowtree,
One solution id to disable them only when the forum is displayed.
you must use old phpbb's one
yes, the bridge doesn't support any Ajax based module.update - the xmla was because we have JIM running (PM system)
One solution id to disable them only when the forum is displayed.
If the password you use for your phpbb account doesn't match the one for joomla,but I still can't login to the admin panel, it says my password is not correct,
you must use old phpbb's one
-
- Joomla! Enthusiast
- Posts: 108
- Joined: Thu Jan 26, 2006 2:29 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
the passwords should match, I've been able to get in using the main admin acount, but i use another super admin account that i'd like to be able to use, that user has been carried over from Joomla so it should be the joomla password correct?
-
- Joomla! Explorer
- Posts: 437
- Joined: Tue Oct 04, 2005 3:56 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
if this account was created after bridging this won't work, because password will be salted in phpbb side.but i use another super admin account that i'd like to be able to use, that user has been carried over from Joomla so it should be the joomla password correct?
Solution: use the older phpbb admin account (the one available before bridging), and use it to fix the passord of your new phpbb super admin account.
-
- Joomla! Enthusiast
- Posts: 108
- Joined: Thu Jan 26, 2006 2:29 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
OK, somehow I've got it working for both admin accounts,
I assume it should be fine now as all users will be transferred from the Joomla side,
one other thing, to edit the template do I have to edit the subSilverInteg.css file?
Thanks for your help and the bridge,
I assume it should be fine now as all users will be transferred from the Joomla side,
one other thing, to edit the template do I have to edit the subSilverInteg.css file?
Thanks for your help and the bridge,
-
- Joomla! Explorer
- Posts: 437
- Joined: Tue Oct 04, 2005 3:56 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
hi willowtree,
you don't need to necessarily call your css subSilverInteg.css.
Name is set in conf file of bridge.
If you use subsilver theme, justr ovewrite theme with files provided.
If you which to use an other theme this might be less obvious, just see hacks section
you don't need to necessarily call your css subSilverInteg.css.
Name is set in conf file of bridge.
If you use subsilver theme, justr ovewrite theme with files provided.
If you which to use an other theme this might be less obvious, just see hacks section
-
- Joomla! Enthusiast
- Posts: 108
- Joined: Thu Jan 26, 2006 2:29 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
all i really want to do is change some colours, so i think i'll just edit the subsilverinteg.css file, i'm a phobb newbie i just need to to blend in with the rest of the site,
Thanks,
Thanks,
-
- Joomla! Apprentice
- Posts: 13
- Joined: Sun Oct 29, 2006 5:08 am
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
Mehdi do you have any plans to make it compatible with Phpbb3? I have someone who is offering $1500.00 USD for a bridge that can work with PHPBB3 for Joomla. Would you be interested? I'm sure he wouldn't mind if its released to the public.
-
- Joomla! Explorer
- Posts: 437
- Joined: Tue Oct 04, 2005 3:56 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
hi unmgroup,
Tomorrow, I travel for a week, so I might be a bit less available.
Willl try to check my mailbox from time to time though.
Thanks for the suggestion.
really ? that's interesting . Maybe I can get in contact with him (if you can pm details).I have someone who is offering $1500.00 USD for a bridge that can work with PHPBB3 for Joomla
Tomorrow, I travel for a week, so I might be a bit less available.
Willl try to check my mailbox from time to time though.
Thanks for the suggestion.
-
- Joomla! Fledgling
- Posts: 1
- Joined: Sun Oct 14, 2007 4:26 am
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
It said I wasn't allowed to send private messages, and your email address isn't listed. But I can offer you $1500 for a bridge that can work with PHPBB3 for Joomla that will be released publicly for all to use. Contact me at [email protected]
mehdi wrote: hi unmgroup,really ? that's interesting . Maybe I can get in contact with him (if you can pm details).I have someone who is offering $1500.00 USD for a bridge that can work with PHPBB3 for Joomla
Tomorrow, I travel for a week, so I might be a bit less available.
Willl try to check my mailbox from time to time though.
Thanks for the suggestion.
Last edited by StumOutsourcing on Sun Oct 14, 2007 4:34 am, edited 1 time in total.
-
- Joomla! Explorer
- Posts: 437
- Joined: Tue Oct 04, 2005 3:56 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
hi StumOutsourcing
just sent you a mail
just sent you a mail
-
- Joomla! Intern
- Posts: 62
- Joined: Wed Aug 15, 2007 1:53 am
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
Hi,
I keep getting this problem with the bridges.
I have installed,
joomla 10.0.13 with community builder 1.1
coppermine 1.4.12 with bridge
Phpbb 2.0.22 with bride
all worked fine initially, but then when i start to install more modules, components and community builder plugins, the two bridges die.
i get a blank screen for coppermine and the html body error for phpbb
i have re-installed this whole setup many times to see wat is wat but i cant figure it out.
i'm now stuck trying to decide which forum to use that supports coppermine and joomla easily.
I keep getting this problem with the bridges.
I have installed,
joomla 10.0.13 with community builder 1.1
coppermine 1.4.12 with bridge
Phpbb 2.0.22 with bride
all worked fine initially, but then when i start to install more modules, components and community builder plugins, the two bridges die.
i get a blank screen for coppermine and the html body error for phpbb
i have re-installed this whole setup many times to see wat is wat but i cant figure it out.
i'm now stuck trying to decide which forum to use that supports coppermine and joomla easily.
-
- Joomla! Explorer
- Posts: 437
- Joined: Tue Oct 04, 2005 3:56 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
hi deandre81,
- check gzip compression is disabled for joomla & phpbb
- check that you don't use any ajax based mambot/module. sorry bridges doesn't like ajax.
You can always perform a local install, then install one by one modules, and see when problem occurs.
- check gzip compression is disabled for joomla & phpbb
- check that you don't use any ajax based mambot/module. sorry bridges doesn't like ajax.
You can always perform a local install, then install one by one modules, and see when problem occurs.
-
- Joomla! Intern
- Posts: 62
- Joined: Wed Aug 15, 2007 1:53 am
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
Well i do have a few Ajax modules......
-
- Joomla! Explorer
- Posts: 437
- Joined: Tue Oct 04, 2005 3:56 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
try to disable them, and see if that's the problem.Well i do have a few Ajax modules......
-
- Joomla! Champion
- Posts: 7018
- Joined: Wed Nov 22, 2006 3:35 pm
- Location: Nebraska
- Contact:
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
Might want to check out what's been going on with RocketWerx. Andy is already beta testing a bridge between v 1.5 and phpBB3.unmgroup wrote: Mehdi do you have any plans to make it compatible with Phpbb3? I have someone who is offering $1500.00 USD for a bridge that can work with PHPBB3 for Joomla. Would you be interested? I'm sure he wouldn't mind if its released to the public.
-
- Joomla! Explorer
- Posts: 437
- Joined: Tue Oct 04, 2005 3:56 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
hi AmyStephen ,
What they are announcing looks promising,
although I doubt they 'll be able to reach a bug free result without any hacking.
Also, their first version won't offer "visual integration".
The guy StumOutsourcing didn't answered to my mail
Unfortunately, they don't publically provide any beta I can test....Andy is already beta testing a bridge between v 1.5 and phpBB3.
What they are announcing looks promising,
although I doubt they 'll be able to reach a bug free result without any hacking.
Also, their first version won't offer "visual integration".
The guy StumOutsourcing didn't answered to my mail
-
- Joomla! Champion
- Posts: 7018
- Joined: Wed Nov 22, 2006 3:35 pm
- Location: Nebraska
- Contact:
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
Mehdi -
From what I've heard, Andy's on vacation for the next couple of weeks. But, it might be worthwhile, if you are interested is seeing the beta, to post into that thread. Given your experience, I am guessing Andy would welcome your involvement. (I missed the signup, too ).
You are right, it sounds like the first version will not be everything it will eventually be. But, I hope there won't have to be hacking since I am certain the functions provided will work. Which is likely the reason they are conservative and not doing everything at once. Easier to guarantee quality.
Thanks!
Amy
From what I've heard, Andy's on vacation for the next couple of weeks. But, it might be worthwhile, if you are interested is seeing the beta, to post into that thread. Given your experience, I am guessing Andy would welcome your involvement. (I missed the signup, too ).
You are right, it sounds like the first version will not be everything it will eventually be. But, I hope there won't have to be hacking since I am certain the functions provided will work. Which is likely the reason they are conservative and not doing everything at once. Easier to guarantee quality.
Thanks!
Amy
-
- Joomla! Fledgling
- Posts: 4
- Joined: Wed Oct 24, 2007 6:18 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
I keep posting in various places but so far I'm not getting any answers.
I am using Joomla 1.0.13 and PhPbb 2.0.22
I tried following instructions using Mehdi's Bridge and managed to get the bridge functioning however cannot find what is wrong.
When I try to use the forum or just click on the joomla link to it, I get "You have specified an incorrect or inactive username, or an invalid password."
And the page redirects to a white page.
Site is located at http://www.xveegerx.com/Joomla or the phpbb http://www.xveegerx.com/forum
Anyone know what I have done wrong or not done to finish this to get it to work?
I am using Joomla 1.0.13 and PhPbb 2.0.22
I tried following instructions using Mehdi's Bridge and managed to get the bridge functioning however cannot find what is wrong.
When I try to use the forum or just click on the joomla link to it, I get "You have specified an incorrect or inactive username, or an invalid password."
And the page redirects to a white page.
Site is located at http://www.xveegerx.com/Joomla or the phpbb http://www.xveegerx.com/forum
Anyone know what I have done wrong or not done to finish this to get it to work?
-
- Joomla! Apprentice
- Posts: 27
- Joined: Sun Aug 12, 2007 7:50 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
xveegerx,
how did you get the wrapper running when using a link like http://www.xveegerx.com/forum. I guess you are 'jumping' or redirecting into the wrapper, correct? Or how did you get the Joomla template around your forum?
I guess you installed Joomla into subdirectory /Joomla and the forum into subdirectory /Forum?
how did you get the wrapper running when using a link like http://www.xveegerx.com/forum. I guess you are 'jumping' or redirecting into the wrapper, correct? Or how did you get the Joomla template around your forum?
I guess you installed Joomla into subdirectory /Joomla and the forum into subdirectory /Forum?
cu,
Michael
Michael
-
- Joomla! Fledgling
- Posts: 4
- Joined: Wed Oct 24, 2007 6:18 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
What I did was I installed phpbb first, had it up and running then later was trying to find an image gallery, found coppermine but also found joomla which was available from my hosting service (cpanel - fantastic installs)Roaster wrote: xveegerx,
how did you get the wrapper running when using a link like http://www.xveegerx.com/forum. I guess you are 'jumping' or redirecting into the wrapper, correct? Or how did you get the Joomla template around your forum?
I guess you installed Joomla into subdirectory /Joomla and the forum into subdirectory /Forum?
I installed Joomla, found it quite confusing, then uninstalled it, then installed phpnuke, tried to use it and decided Joomla seemed more friendly. So I uninstalled that, and installed Joomla again, so yes, my phpbb is installed as http://www.xveegerx.com/forum and Joomla is installed as http://www.xveegerx.com/Joomla
I then used Mehdi's bridge and went through as thorough as possible to get this far. I just got a reply from Mehdi in fact and he stated to turn off the gzip on both Joomla and phpbb however I cannot access phpbb now and don't know how to do that. I did check Joomla and it is off there. So I do not know what to do next.
I'm sorry I also do not know what this "wrapper" is, I am totally noob here. If you are asking about the template of the phpbb? I used the AcidTechTiger and modified it to my personal tastes. But I don't know if this is what you are asking about.
Thank you by the way, for the reply, please forgive my ignorance in this matter, but I really wish to get this working, and THEN I have the problem of trying to bridge the gallery next. I didn't even want to attempt that until I got the phpbb working though.
-
- Joomla! Apprentice
- Posts: 27
- Joined: Sun Aug 12, 2007 7:50 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
Hi xveegerx,
thanks for your reply. A wrapper, in Joomla context, is a module which allows you to display any external website inside Joomla. As you don't know what this term means I guess you do not use it
So, a last question still remains: how do you get your forum look like the Joomla front page? At least you have got some links on the forum front page which link to your Joomla installation. Did you code some own HTML to get this corporate layout in the forum?
thanks for your reply. A wrapper, in Joomla context, is a module which allows you to display any external website inside Joomla. As you don't know what this term means I guess you do not use it
So, a last question still remains: how do you get your forum look like the Joomla front page? At least you have got some links on the forum front page which link to your Joomla installation. Did you code some own HTML to get this corporate layout in the forum?
cu,
Michael
Michael
-
- Joomla! Fledgling
- Posts: 4
- Joined: Wed Oct 24, 2007 6:18 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
Ok I checked in the Joomla Administration and there is a "wrapper" listed in modules but there is a red X next to it and it is "unpublished" status.
As for the phpbb I used the AcidTechTiger template, then modified the acidtechtiger.css for my own look and feel of the pages. The header is my own as well.
The Joomla front page is also a template, It is from http://www.compassdesigns.net called JS Lunar Eclipse made from the Solar Flare template.
As for the phpbb I used the AcidTechTiger template, then modified the acidtechtiger.css for my own look and feel of the pages. The header is my own as well.
The Joomla front page is also a template, It is from http://www.compassdesigns.net called JS Lunar Eclipse made from the Solar Flare template.
-
- Joomla! Apprentice
- Posts: 35
- Joined: Wed Apr 18, 2007 9:12 pm
Re: Mehdi's Bridge for Phpbb2 (not 3 yet ...)
Fatal error: Call to undefined function joomphpbbBindUsername() in /htdocs/wwwroot/forum/login.php on line 57
Dose anyone know how to fix it?
Thanks
Dose anyone know how to fix it?
Thanks